How To Tie The BASIX Hair Rig
The BASIX range is designed to help make fishing more accessible and to provide the basic tackle you need to catch carp. Rigs can be tricky and complicated but the BASIX range has all the core components you will need to get started!
Step 1
Start by 12inches of coated braid off of the spool.
Step 2
Strip 5 inches of coating, off one end of the material.
You can use your nails or one of our Strippa Tool
Step 3
Tie a small overhand loop knot in the uncoated section.
Step 4
Using a Baiting Needle, attach your hookbait.
We are using a 15mm bait
Step 5
Secure it in place with a Hair Stop.
Step 6
Take a Basix Size 6 Wide Gape Hook.
Step 7
Enter the back of the hook and trap the hair length in place
Step 8
Tie off using a Knotless Knot
Ensure there is an uncoated section above the hook eye
Step 9
Set your rig length with an Fig.8 Loop Knot
This loop will attach to your Quick Change Swivel
Step 10
Thread on an Anti-Tangle Sleeve
You can use a Gate Latch Needle to help with this step
Step 11
Your rig is now ready to be attached to your preferred lead set-up!
